1-800-280-2872

It’s this simple: Water “ponds” on flat roofs. Where water ponds, leaks develop. Leaks lead to damage. Damage leads to costly repairs. It’s a never ending cycle, unless a sloped metal retrofit roof replaces that old, flat, high-maintenance roof. Sloped metal roofs offer superior roof performance, reduced maintenance costs, and can greatly enhance the building’s overall appearance.

SLOPED BEATS FLAT Year After Year

The backbone of any well-built, sloped metal reroof project is a custom-designed, pre-engineered and pre-cut framing system designed by ReRoof America. ReRoof America, Inc. (RRA) helped create the sloped metal reroof industry and is indeed the leader in retrofit framing systems. In fact, in our 15+years in the industry, there has not been a roofing failure with a RRA framing system. Now that’s peace of mind.

All RRA’s framing systems feature the patented Adjust-a-Web™ System, which creates a framing system for an even roof slope and eliminates the need for costly and time-consuming field cutting of the vertical framing members.

RRA can engineer a lightweight framing system to fit any roof, fascia and soffit system, transforming that old, flat, leaking roof into an attractive, high-performance, low-maintenance and long-life asset.

CURA® ADJUST-A-WEB™
SAVES TIME AND MONEY.

Adjust-a-Web framing systems effectively transfers the roof loads into the existing structural system (in most cases without the need for expensive roof tear-off) and becomes the foundation for the new sloped roof, facade and soffit.

The Adjust-a-Web™ System can handle complex roof configurations and slopes from 1/4:12 to 12:12 or greater with ease and routinely used to over 20' heights. Each system is engineered to your specifications by RRS's staff who provide completely detailed shop drawings and construction documentation, signed and sealed by a Professional Engineer.

The horizontal members, vertical members, bottom members and top clips arrive on the jobsite factory-cut, marked and ready for installation on virtually any existing underlying structural configuration.

CURA RETROFIT
FRAMING SYSTEMS PROVIDE...

SLOPED ROOF BENEFITS

Eliminates ponding water; controls run off
Does it right and reduces maintenance costs
Improves roof performance and extends roof life
Virtually eliminates potential for roof collapse due to weight of ponded water
Improves insulation qualities of roof; saves owner heating and cooling costs

ADAPTABILITY

Fits over virtually any existing roof without expensive roof tear-off
Designed for use with any roof, fascia or soffit system
Designed for extreme snow, hurricane and/or earthquake loads
Provides optimal structural support
Lightweight framing systems minimizes dead load

ADJUSTABILITY

Provides an even roof slope
Reduces labor cost from in-the-field cutting, drilling or welding
Reduces errors and reworking

ENGINEERING/TECH SUPPORT

Provides design, shop drawings, structural calcs, attachment requirements, parts allocation information, and suggested erection procedures

Provides technical assistance throughout the sales, design and construction process
Offers construction training/support and jobsite support

TRAINING/IN-FIELD SUPPORT

Offers sales and erection training
Must offer in-field support for start-up or problems

FACTORY-CUT COMPONENTS

Reduces erection costs by transferring field labor costs to the factory
Makes quality control of the framing components easier
All components available in Red Oxide or Galvanized finishes

QUICK, EASY ERECTION

Reduces construction time and costs
Minimizes disruption for building owner/tenants
Helps the contractor meet construction schedule
Increases owner and contractor satisfaction

IMPROVE BUILDING APPEARANCE

Transforms old buildings to look like new
Metal roofs are a popular design style
Lightweight framing systems give architects more roof design options

Cura®, ReRoof America, Adjust-a-Web, CURA Truss, Flex Frame, Sloped Beats Flat, Deck Bridge, and Delta Brace are marks of HSI. US Patents 4,620,397; 4,602,468, 4,534,148; 4,520,610; 4,835,917; 5,005,323; 5,142,838; 5,303,528. Other patents pending.

Technical Information: Cura Adjustable Reroof Framing Systems are custom designed by professional engineers in accordance with good engineering practice and will transmit the specified, uniformly-applied new roof load through the Cura Adjustable Frame directly to the underlying structure. This load transfer will result in concentrated loads occurring on the existing structure. The buyer should make certain that the Cura System is properly erected and braced, and does not cause undesirable effects to occur in the existing structure, and that its use meets all applicable code, insurance, government and good engineering requirements. Cura Adjustable Reroof Framing Systems are protected by eight Cura Patents licensed to ReRoof America, Inc. Any system that incorporates adjustability for refoofing infringes the patents. To not infringe the patents, it is required that any given web member of a reroof framing system be cut to the precise length required.